1776 Stays - First try-on and a few notes

Isabella's comment about front-lacing stays making it easier to get dressed reminded me that I didn't have to wait for someone to lace me up so that I could try on my stays and see how they fit. So I duly pulled on my chemise, petticoat, and skirt, took a deep breath and said some prayers, and slipped on the stays and laced them up. Then looked in the mirror and felt like jumping up and down with excitement.

The fit is AMAZING. The silhouette they give is AMAZING! I believe it would look good on anyone, any body type, any size. And being that this was the first pattern I've ever gotten from a book, scaled up, and then took the time to fit it to my figure, it felt like a MIRACLE that my efforts actually WORKED!! Can I be considered a sewist of intermediate skill level now???

They aren't perfect. For one thing, somehow I made them too big and the front and back lacing channels close completely, which is a bummer because I like to lace tight because the stays always loosen up after a few hours. They are tight, don't get me wrong. But I could stand to lace them a lot tighter. I expected either the front or the back to close completely, but not both. I can't think how to fix this at this point because taking the stays in at the side seam would move the shoulder straps/armscye back too much, and that part is already borderline about-to-not-fit. But that's easily fixed in the pattern and in fact I've traced Melissa's pattern to move the shoulder straps a little more towards center front and have taken in the side-back seam a bit. For myself, perhaps I can make a stomacher with a busk to take up some space so that when they are all laced up, it will help keep them snug as they loosen up.

Also, I have no idea if these two tabs at the side are supposed to be touching or not, nor do I know how to fix it. But I don't think it's a glaring mistake.

I bought a lovely piece of soft, thin leather off of ebay to use for binding. It's a little thicker than chamois, not much, but it's just a little bit more difficult to get a pin into to hold it in place while I'm sewing it on.

These little clips from Dritz (or was it Clover?), which I found in the quilting section at Joann's, are PERFECT for this job.

My needle wasn't doing a very great job at piercing the binding, so I bought some leather needles and some embroidery needles. A couple of bloggers I read mentioned not wanting to use leather needles because they leave too big a hole, but I wanted to try them anyway.

This bit was done entirely with a leather needle. I've taken as good of a close-up as I can, and I see nothing to concern me re: size of the hole left by a leather needle. I used Dritz leather needles and I used the smallest one in the package:

I was very happy with the leather needles as they go through the leather quite easily. That being the case, they also go through FLESH quite easily and I got a couple of nasty cuts in my fingers until I got used to using the needle.

Last night I bound a tab with a new embroidery needle and it worked just fine. I don't know what kind of needle my old one was (a dull one. Haha!) but I threw it away and I think I'll just use the embroidery needle for now because I don't want to get blood on my white stays due to carelessness with the leather needles.

Oh, and it seems to take me about an hour to bind each tab. At this rate it's going to take me right up till the last week of Sherwood Forest before my costume is ready! I am quite relieved to know that my skirt and chemise are now done (except to sew ribbon ties onto the cuffs of the chemise) and that the stays fit. Now I just need to make Melissa's stuff, but I think I'm going to have to teach her to bind the stays herself because of timing issues. I did try my stays on her and they fit her perfectly, so at least I don't have to make muslins to fit her.

1776 stays from Corsets and Crinolines - Patterning & Fitting

I never finished the Diderot stays. The day I tried to put grommets in them, I discovered that the hopsack linen and the sturdy cotton twill I used as lining were, together, too thick to be able to make the big holes for my size 0 grommets. The weave of the hopsack was too loose and after I pierced it with my awl, it would immediately start to close back up. I gave up.

Instead I'm trying to make the 1776 stays from Nora Waugh's Corsets and Crinolines. It's only a two-piece pattern so I hope it will go quickly because Sherwood Forest starts next weekend. But Melissa and I probably won't go until March, so I have time to scramble together our costumes, but I'm a slow sewer so it will still be a crunch.

This is the first pair of stays that I have actually tried to fit to my figure, and I'm really, really glad I've taken the time to make several muslins, as irritating as it is.

The right side of this picture (viewer's right) shows how this pattern first fit me after scaling it up but without making any other changes. I think the original wearer had very slender hips because there was a nine-inch gap between the lacing holes at my hips but only a two-inch gap at the lacing holes at the top.

I took in a little bit at the top of the center back, and then put in an extra tab on the side-back piece, adding a little to the waist as well. The new mock-up fit my dress form much better.

I felt that it was still a bit long in the waist at the back, so I pinned up the excess and transferred the changes to my pattern piece. Even though, to my eyes, the center back looks straight on the dress form, it was clearly NOT straight on the pattern when laid flat.

I fixed the center back pattern piece and sewed up a new mockup. I haven't made any changes to the front pattern piece at this point. It fit my dress form quite nicely and I thought I was ready to go, but a little voice at the back of my mind kept whispering, "But everything you've read on the costume blogs says that the seam is supposed to be curved at the side FRONT, not the side back." I tried to convince myself that it wouldn't make any difference on a stays pattern that consisted of two pieces, and only one seam anyway, but I just had to retrace the pattern. I transferred the side-back curve to the side-front and straightened out the side back.

Sewed up a fourth muslin and pinned it to my dress form. I honestly couldn't tell any difference in the fit, but I suppose I'll keep it like this just for my own piece of mind since I don't know if it's okay to keep the side front seam straight and curve the side back.


One last change I am making to this pattern--and I won't bother with a muslin for this small change--is to take out that extra tab at the side-back. You can see on the dress form how it sticks out.

It was easy to just fold it back and tape it down on the pattern to get it out of the way. The line of the seam wasn't affected at all.

Now I just need to decide on what fabric to make this out of. I have some beautiful vintage silk brocade, supposedly hand-woven, that I bought specifically to make stays. But I feel like it should be part of a fabulous fantasy costume and I am having trouble visualizing how I want it to look. So I think I'll save it until I have a clear idea of the look I want. I'm leaning towards just using some white linen in my stash and making a peasanty-looking skirt. For some reason I've always liked the peasant look even more than high-class lady. But in my everyday life, I'm a bit of a plain jane. I can't tolerate heels and I can't stand the way fashionistas in this city dress. So my love of peasant looks is really a reflection of my natural tastes in fashion, I guess.